MB C200 km changed diagnosis
2239 Views 4 Replies Latest reply: 2015-02-19 10:41:11
-
Level 6
(518) points
I recently checked MB C200 2014, I extract 3 km reading from 3 different ECM and all were ok but abs module had a permanent fault code which was (one or more signals sent from control unit "A1 Instrument Cluster" via the CAN bus is implausible) this fault code means ABS ECM cannot read the data from Inst. Cluster and appears when the mileage is changed, ABS ECM was also unable to read ABS mileage... be aware of this
-
Level 5
(272) points
Very good info fix but I have mb c180 WDB2020182F367584 this is vin no I also need
to know the exact model year for this car I decode this vin on some site some say it is
2002 model others say it is 1995 the problem with this car is it has slight jolt in all
gears except first when my pro does not show any thing related to transmission car
has 122000 miles on counter with auto tranny need help please -
Level 7
(1143) points
If you do auto detect (car ignition on or even running), the Pro can't find it? If not, it will ask you to manually enter the data. If you do so, won't it decode the right vechicle for you?
In my experience (so far) I always got the right version right after entering the vin when a auto detect failed. -
Level 7
(1143) points
Think this is the correct one:
http://www.vindecoderz.com/EN/check-lookup/WDB2020182F367584 -
Level 6
(518) points
Think maxtronix is right about your car info.
For your transmission I cannot tell you exact what is wrong with it, but I tell you to
check 3 things that cause jolt in gears, 1- check your gearbox suspension, 2- check
your propeller shaft, it hasn't to be shimmy, 3- check your disk for each gear
These three issues cannot be identified via diagnostic tool, it's experimental
Good luck
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities