Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > Europe Cars > Renault Kangoo van
Renault Kangoo van

2155 Views 4 Replies Latest reply: 2015-05-29 17:06:59


  •   Level 3   
    (54) points
    injectorman19
    2015-03-10 20:46:19
     Hi guys I have in a 2005 Renault Kangoo van 1.5 dci that when injectors are programmed in she raves up to 1250 rpm and will not turn of , any ideas , 

    Tags: maxisys


  •   Level 3   
    (54) points
    injectorman19
    2015-03-11 18:48:33
     Just an update guys some one had put in the wrong injectors but never programme d them in so when we did she went into delphi safe mode and run at 1250 rpm .
    So if your ever caught out this is what to do 
    Just fined the original injectors from Renault and recode them in . 
    Hope this may help someone one day .

  •   Level 2   
    (28) points
    sameer

    2015-04-29 10:00:03 (Reply to:injectorman19)

     Thanks for useful information. 

    I have problem with kangoo 2008 after some miles stop the engine and restart wont start. only have to wait for an hour to start it again. no fault code in diagnosis. Any idea please share it.
    Thanks

  •   Level 7   
    (1143) points
    Matronix

    2015-05-01 04:42:13 (Reply to:sameer)

     It is not really that kind of forum but for this time...

    you could have O2 sensor, coolant temp, or crank/cam sensor issues but you really have to do real diagnosis from start on; if no start what are you missing (fuel, spark) and from there on start diagnosing

  •   Level 9   
    (5837) points
    Ashraf

    2015-05-29 17:06:59 (Reply to:sameer)

     Sameer you got to tell use more about your vehicle mate..................... Is it Petrol or Diesel.............?
    Or as said by other member you need to check the basics first......

    1) Diagnose to see if there are any fault codes in Engine ECU

    2) If there are NO any fault codes than Check your Crank Shaft Sensor for any dirt from Clutch, and Fly Wheel crandings remove the sensor clean it fit it back and see if that helps...........

    3) Check Engine ECU Relay for malfunction..............
1
  Total1 Pages