2099 Views 1 Replies Latest reply: 2015-06-05 20:20:24
You are going to need PIN from dealer, here are the instructions for Chrysler’s Scan Tool, should be same or close for Maxisys… good luck:
PROGRAMMING IGNITION KEYS TO THE WIN
1. Connect a battery
charger to the vehicle.
2. Connect the scan tool.
3. Have a unique vehicle
PIN readily available before running the routine.
4. Ignition key should be
in RUN position.
5. Select “ECU View”.
6. Select “WIN Wireless
Control”.
7. Select “Miscellaneous
Functions.”
8. Select “Program
Ignition Keys or Key FOBs”, Start
9. Enter the PIN when
prompted.
10. Verify the correct
information.
11. Cycle ignition key after the successful routine completion.