You are going to need PIN from dealer, here are the instructions for Chrysler’s Scan Tool, should be same or close for Maxisys… good luck:

PROGRAMMING IGNITION KEYS TO THE WIN

1. Connect a battery charger to the vehicle.

2. Connect the scan tool.

3. Have a unique vehicle PIN readily available before running the routine.

4. Ignition key should be in RUN position.

5. Select “ECU View”.

6. Select “WIN Wireless Control”.

7. Select “Miscellaneous Functions.”

8. Select “Program Ignition Keys or Key FOBs”, Start

9. Enter the PIN when prompted.

10. Verify the correct information.

11. Cycle ignition key after the successful routine completion.