3379 Views 10 Replies Latest reply: 2020-10-18 10:42:01
Tags: MaxisysPro , TPMS , Reset
this are the 3 way you can relearn tpms sensors on Chrysler vehicles after a tire rotation or replacement of the sensors if no issues are found with the vehicle.
1. -Fill tires to appropriate PSI.
- Turn ignition to the "ON" position, but do not turn the engine on.
- Press the "MENU" button on the EVIC until the screen reads "Retrain Tire Sensor-No"
- Press the "Step" button to confirm the relearn process.
- Press "MENU" again and the display should read "train left front tire".
- Place relearn magnet on the left front tire's valve stem until the horn honks.
- Continue the same process for the other tires in a clockwise pattern.
- The display should read "training complete". Then press "step", "C/T", "reset", "menu" buttons to complete the procedure.
2. - Inflate tires to the appropriate PSI.
-Drive the car for at least 10 minutes and maintain speeds above 20 MPH.
3. -Fill tires to appropriate PSI.
- Turn ignition to the "ON" position, but do not turn the engine on.
- Press the "MENU" button on the Overhead console until the screen reads "Retrain Tire Sensor-No"
- Press the "Step" button to confirm the relearn process.
- Press "MENU" again and the display should read "train left front tire".
- Place relearn magnet on the left front tire's valve stem until the horn honks.
- Continue the same process for the other tires in a clockwise pattern.
- The display should read "training complete". Then press "step", "C/T", "reset", "menu" buttons to complete the procedure
copy and pasted from the web but they are the same procedure found on my dealer connect and tech-authority account.