In need of some volvo expert advice
2241 Views 2 Replies Latest reply: 2016-04-01 08:47:36
-
Level 3
(52) points
I apologize but this ? has nothing to do with maxysis.
I have a 2006 volvo s60 that recently developed a bad vibration at idle.
All 3 mounts and the subframe isolators are replaced. No codes are present and the idle speed stays at a steady 700 to 750. It feels like when a motor mount fails and is metal to metal, off idle the car performs normally. The coils and plugs were replaced less than 5,000 miles ago.
Any advice or assistance would be greatly appreciated. I really don't want to just throw parts and hope it fixes the problem -
Level 10
(7578) points
I would check the exhaust insulators ,isolate the exhaust , loosen up the exhaust system to manifold bolts, and the upper and lower torque strut mount bolts. With vehicle on alignment rack have an assistant with car idling with foot on brake shift in into reverse than back into drive several times and re tighten all the bolts while vehicle is idling in drive (with assistant keeping foot on brake pedal .Maybe will help. -
Level 3
(52) points
Thank you I will try what you suggest and give feedback when finished
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities