9544 Views 18 Replies Latest reply: 2016-04-29 14:40:07
-
Level 3
(98) points
Hello i need your help please, i change the steering rack on this car 2014(E) Seat 5F - León 2013> Berline CLHB 1.6L TDI 66kw EU5. Ecu code: B116854 Active/static steering angle transmitter no basic setting. I can't adapt the basic setting of steering angle because i have this error message : refusal maintenance code 7F 31 33, necessary access authorization, execute access. What can i do? -
Level 10
(10965) points
Hi, the basic setting of G85 on this car is in 44-power steering and the access code is 19249.
Basic setting steps are as below:
After that start the vehicle and turn the steering wheel completely to the left and hold it there for 1 second. Then turn steering wheel completely to the right and hold it there for 1 second. To make sure the basic setting was successful, go back to check the sensor again: 08 – Group 004 and Field 1 should show -1.5o~+1.5o.
At the end, please go ahead to clear the DTCs. Thanks!
-
Level 3
(98) points
Hi, thank you for all those informations. Today, i try to make the basic setting exactly
as you have told me, but i still have the same error message code 7F 31 33. When
enter the security code 19249 or 0000019249, i can read successful connection but
then the basic setting fails. What's wrong?how manydigits di i enter it? Should i put
zeros? -
Level 3
(98) points
Here the ecu information:
Numero vag: 5Q0909144S
System designation: EPS_MQB_ZFLS
Codage de logiciel: 0002
Software version: 1063
WSC: 00000
Thank you in advance. -
Level 8
(2559) points
if that doesnt work go to ABS access code 40168-basic settings i cant rememder the rest but its all on the soss-tech wiki.... -
Level 10
(10965) points
Hi, the security code is 19249. If you don't login successfully then there will be error message code 7F 31 33 and you cannot do basic setting.If you login successfully then please do not exit otherwise you'll need to login again. If the basic setting failed the first time and you need to do it again then please login again. Every time when you need to do basic setting, you'll have to login with security code.If you cannot get the basic setting done, then please upload a data log for engineers to check. Thanks! -
Level 3
(98) points
Hi, today i tried again to do the basic setting and i still have the same error message
even entering the correct code (19249)and a successful connexion. So i made several
screen shots and you've sent it via data recording. Thanks. -
Level 10
(10965) points
Hi, please try below steps:1. Please access 44 Steering Assistance system, security login, then enter security code 19249. Before accessing basic settings, turn the steering wheel one turn to the right and one turn to the left to make sure that the steering wheel is straight with the vehicle wheels pointed straight.2. Access basic settings and select steering angle sensor; then click at “Start” and it will show that it has been calibrated(（When turning the steering wheel, please select live data monitor to check its prerequisites and calibration status. Its prerequisites need to be met before doing calibration ).3. At the meantime, Steering wheel fault light and Anti-Slip lamp are lit up.4. Turn the steering wheel one turn to the left and turn it one turn to the right to make sure that the steering wheel is straight with the vehicle wheels pointed straight( after this fault light and Anti-Slip lamp light are off). G85 steering sensor has been calibrated.5. Then you just need to do drive test and try to erase codes. -
Level 3
(98) points
Hi, today i tried again to do the basic setting by follwing your instructionsto the letter and i still have the same error message 7F 31 33 even entering the correct code (19249)and a successful connexion. So i made several screen shots and you've sent it via data recording. Thanks. -
Level 10
(10965) points
Hi, security login is needed each time when we do basic settings. Once failed to basic settings, if you need to do it again, you need to do security login first. When you try to do basic settings, please make sure that all the prerequisites are met (Click “prerequisites of basic settings” in live data to check if all the prerequisites are met). Or else, basic settings would not be successful. Thanks!
- Related links
-
Top users
-
Online users
-
Search Communities