1852 Views 4 Replies Latest reply: 2016-05-24 08:19:51
Hi, the two codes should be caused by the
same problem. Please try below ways to troubleshoot first. If there is still problem,
please upload a data log for us to check further. Thanks!
1. Turn off ignition key
2. Press off connector at component N2/7
(Restraint systems control unit) with plug and pull aid.
3. Connect socket box to component N2/7
(Restraint systems control unit). Then test the resistance value.
If resistance value is above 20KΩ then
there is no problem with circuit. Otherwise please check the wiring connection
or if there is short circuit problem.