I'm using the Maxisys MS906 tried to program new keys for the Ford F150 2014 and it did not work. Truck went into alarm mode which drained battery and the keys are not programmed. Any help would be appreciated.
1387 Views 5 Replies Latest reply: 2020-06-03 04:18:54
-
Level 1
(5) points
-
Level 10
(7578) points
A battery charger/ maintainer might help, LOL. I think you can add keys but might be SOL in an all keys lost situation. I think you need to start off the 10 minute security access with a working programmed key the ignition. -
Level 4
(155) points
When the alarm is activated on a ford, there's a different process to be able to program keys. Google it, someone should have posted this problem using the original Key programmer.... Advanced Diagnostics. -
Level 4
(155) points
Also, you posted no information on why you needed to program keys to the truck. Like always, you need 2 keys, they have to have the correct CHIP. If the keys have no chips or incorrect keys, the car will never start. Then there's the reason why this happened. BE more specific next time. -
Level 1
(8) points
-
Level 10
(7578) points
Use a battery maintainer , especially if it has Timed PATS with a 10 minute security access with the key on. I usually like to keep the door ,hood, and lift gates open , but close their latches with a screw driver until all is done.
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities