Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > Asian Cars > Nissan Qashqai J10 key programming probl...
Nissan Qashqai J10 key programming problem P1610 and P1615 DTC

2632 Views 11 Replies Latest reply: 2020-01-11 05:20:22


  •   Level 2   
    (20) points
    Katarino
    2019-12-25 10:08:03
     Hi, I'm a new member and I have now an MaxiIM IM608. 
    I have a problem programming a keyless for a Nissan Qashqai J10. First I try to program with MVP the programming sequence goes OK, but at end, neither customer key neither new key start the car.
    Now I have IM608 also try to program key, but same problem. 
    DTC P1610 and P1615. 
    Tge programming sequence goes OK, immo light flashes, transponder block, but at end key don't start the car.
    Nissan Qashqai J10 VIN SJNFCAJ10U1125013
    Year 2007
    Bcm label 3 C4f1. Part number JD12CED. 
    284B2-JD12C 
    ECU 48810-JD91A
    Thanks in advance and merry Christmas to all of you. 

    Tags: P1610 , P1615 , Nissan , Qashqai , J10

    Reply

  •   Level 5   
    (350) points
    Costee

    2019-12-25 14:37:27 (Reply to:Katarino)

       
     If you're sure the two keys are good, then the BCM is faulty. Any of the following BCM can work for your car:
    284B2-JD12C
    284B2-JD12D
    284B2-BR01B
    284B2-BR01C
    284B2-BR02C
    What was the PIN you used?
    I presume you used the mechanical key to programme.
    I don't think the issue has to do with 48810-JD91A, which is the steering lock unit.

    Reply

  •   Level 2   
    (20) points
    Katarino
    2019-12-25 23:19:40 (Reply to:Costee)
     Pin code was 3328.
    I try program with I-key:
    https://drive.google.com/file/d/15458PVrge1tBaFEljnQmHKvyWgBhTSrl/view?usp=drivesdk
    https://drive.google.com/file/d/1518SwffRq4W3t9NSw8eQ507Lk04XsTBd/view?usp=drivesdk
    What could make BCM faulty? 
    There is nothing to do on bench to repair BCM? 


    Reply

  •   Level 5   
    (350) points
    Costee

    2019-12-26 08:28:56 (Reply to:Katarino)

     
    The pin code is correct.
    Usually an electrical breach would damage the BCM (e.g. improper battery connection).
    Reply

  •   Level 1   
    (3) points
    ladybug99

    2020-01-01 01:00:19

    Code 1610 is for bcm you should look in to it and when you program a new key you have to use macanicle key and then put your pin #
    Reply

  •   Level 9   
    (5837) points
    Ashraf

    2020-01-02 18:27:53 (Reply to:ladybug99)

     Where do you get this macanicle key from.............?
    Reply

  •   Level 2   
    (20) points
    Katarino
    2020-01-04 17:56:12 (Reply to:Ashraf)
     Hi,
    I get it from a Spanish reseller.
    Why you ask? 
    Is not the right reference? 

    Reply

  •   Level 2   
    (20) points
    Katarino
    2020-01-04 18:18:35 (Reply to:ladybug99)
    Do you know the right configuration for the transponder? 
    I have tango, mini keytool, kx-x2, rw4, megacopy.
    Thanks in advance. 
    Reply

  •   Level 2   
    (20) points
    Katarino
    2020-01-04 18:34:23 (Reply to:Costee)
     BCM must be new or could be from scrap?
    The BCM don't need to be paired with ECU and steering lock unit? 
    Reply

  •   Level 9   
    (5837) points
    Ashraf

    2020-01-05 12:14:56 (Reply to:Katarino)

      I asked you because I have never needed the macanicle key code for programming the Keys on Nissan as you said you need this code to program keys.......Or may be I did not understand you did mean for
    macanicle key........
    Reply
1
2
Next
  Total2 Pages
Last Post Next Post Go to original post Reply to original post
Related links
Top users
Online users
Search Communities