AL319 and firmware update v6.04
3669 Views 6 Replies Latest reply: 2021-11-30 23:39:26
-
Level 1
(5) points
I just updated the software for my AL319 with the software manager_AL319_V6.04.bin the screen says the update was successful, but now the screen on my AL319 states that the "Authorization Language Not Matching" and I cannot exit from this screen.I have V6.02, but I can't get the MaxiLink II software to reinstall because I can't get the device back to "Update Mode".Any ideas?Thanks.file: IMG_6385.jpgTags: AL319 , 6.04 , MaxiLinkII
-
Level 1
(3) points
you just hold left button arrow and power on the unit to get it to reforce to connect to maxi link 2 update program and then make sure you reflash 2 times software and dtc then reboot easy steps -
Level 1
(3) points
This thread helped a ton. Never would have unbricked my AL519 without it. Too bad Autel's own documentation sucks. -
Level 2
(13) points
I have the same model al 319 and the same problem. I’m not sure what arrow button and power button your talking about? Any advice would help. Thanks -
Level 7
(1593) points
-
Level 1
(6) points
The left button is Enter/Exit on AL319.Pressing it while connection, i.e. powering up solved it.Re-updated flash and dtc using the same file and it worked.As others already said, without this thread I would've been stuck with a bricked scan tool. -
Level 1
(3) points
1
Total1 Pages
;){kind=link}
- Related links
-
Top users
-
Online users
-
Search Communities