What is the road test procedure for 2010 MB C350?
1018 Views 2 Replies Latest reply: 2020-03-16 13:10:44
-
Level 1
(5) points
Just installed new ESP/ABS module and using Maxisys to reprogram. It guides me through all of the calibration procedures and finally gets to the Road Test portion, but does not seem to give me great instructions as to how to carry out the Road Test portion of this programming procedure in order to complete. Unfortunately, their tech is closed on weekends.file: Roadtest.jpg -
Level 9
(5837) points
1) Test drive is normally done on an open place where NO any cars.2) Start the engine press Traction Control button, the traction light should start flashing.3) Turn your steering wheel to 45* on lift.4) Put your gear in Drive and let go one full round without pressing accelerator pedal making sure your steering is at 45* all the way.The traction light should go OFF and your test is completed.. -
Level 10
(7578) points
LOL, Seems to me trying something like that while up on a lift with the suspension unloaded up in the air ,all the height sensors would read out of range and one or more wheel would not rotate the one revolution the same as the rest and the test would just abort with fault codes.
1
Total1 Pages
;){kind=link}
- Related links
-
Top users
-
Online users
-
Search Communities