Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > Europe Cars > Cannot read data (pin & cs code) of dono...
Cannot read data (pin & cs code) of donor instrument cluster during Programming instrument cluster

1649 Views 6 Replies Latest reply: 2022-11-15 06:57:21


  •   Level 2   
    (27) points
    BilalAhmed
    2022-03-22 19:43:13
    Hi everyone, 

    I am having problem in reading Pin & CS code of donor instrument cluster for VW golf mk6 2012.
    I have replaced & programmed successfully on 2008 vw golf mk5 . I was able to read pin and cs code easily. 
    But on 2012 golf mk6 I can read pin & cs code of original instrument cluster but I am unable to read data on donor instrument cluster. 
    Following error comes up every time I try to read pin &  cs code of donor (new) cluster. 

    “The service mode cannot be entered.confirm if the inserted key is a working key. “

    Please help how to read information & programm new cluster. Thanks. 
    Regards, 

  •   Level 2   
    (17) points
    Ivan Stamenovski

    2022-03-22 20:24:08 (Reply to:BilalAhmed)

    Did you check vehicle coverage for this model of VW Golf? Some part of models
    support on bench/ boot method of reading password

  •   Level 2   
    (27) points
    BilalAhmed
    2022-03-30 20:30:55 (Reply to:Ivan Stamenovski)
    Hi, where to check the coverage list. It says im508 covers immo 4.
    I dont know how to use bench/boot Methods.

  •   Level 4   
    (161) points
    Matthew Taylor

    2022-03-31 15:47:31 (Reply to:BilalAhmed)

    If you were in Jamaica, I could do it for you using AVDI

  •   Level 1   
    (6) points

    2022-04-28 01:44:20 (Reply to:BilalAhmed)

    Try the eeprom dump and let us know

  •   Level 1   
    (8) points

    2022-05-29 07:54:40 (Reply to:BilalAhmed)

    Hi there
    I have the same problem with a 2006 Audi A3 8P.
    Trying to swap original instruments cluster with one from a donor car.
    Unfortunatl i cant read the immo data from the original cluster nor the donor one.
    I can reed the ECM immo data only with VIN,PIN,CS code and ECU software number.
    In order to do the coding I need the instrument cluster IMMO data.
    Please advise.
    Any help will be appreciated.
    Many thanks

  •   Level 2   
    (22) points
    johnnyyo12

    2022-11-15 06:57:21 (Reply to:)

    Same problemas with 07 VW Passat 2.0L
1
  Total1 Pages