1. Apply the parking brake.
2. Turn on the ignition.
3. Using the vehicle menu, enter the TPMS block in ID registration mode.
4. Use the Autel TPMS tool to trigger all sensors starting from the front left. During this procedure there will be a “BEP” signal and the lamp for turning the corresponding wheel will light.
5. After registering the rear left wheel, “BEP” will beep twice.
6. Turn off the ignition.
7. Turn on the ignition.
8. The wheel pressure will appear on the display.
Sometimes this car during the registration procedure ID is required to start the engine!
+380505900169 WhatsApp, Viber