2480 Views 4 Replies Latest reply: 2015-12-15 13:14:30
Just did the latest US update and it finally works.
If you have strange lines in your screen, change to other language in settings, and back again.
Just did the latest US update and it finally works.
The EU and US firmware updates are different files, but i tried it anyway.
I stumbled upon the solution, for the messed up screen after a firmware update. Happens ONLY when you install a firmware with a different language pack then was installed when you bought it.
So when you do the Update in an other language pack, you're screen is messed up every time.
If you have strange lines in your screen (mostly in settings), change to an other language (You can not see this because there are strange symbols now, so: top row in settings, 3 choises ), and later back again to the prefered one).
It should be fine now.
Tried 5 different firmware versions (EU 4 different language packs, and US 1 pack) and the AL519 is stil working on the US pack now.
Just tested it on the car and it works fine.
Hope the US firmware version from 30 juli 2015 is better English then the European language packs, which should be updated by Autel.
And they should fix the problem with the screen when updating the firmware.
Lots of people have problems with this "bug" for years and it is stil not fixed.
If you're problems are bigger then strange symbols after an update , try to navigate to settings and goto row 7 (bottom) for update modus.
and install the previous firmware again (don't forget to select the right device in maxlinkII).
English should be alright now.