Hello on the 2010 the bleed will not be possible if there are store trouble codes that
needs to be clear first why is not clearing/erasing the code well that needs to be
tested unplug any sensor on the abs system wait untill it sets a code for that sensor
then plug it back on and erase that code see if that works if it does there is nothing
wrong with the tool or software the problem most likely is in the car do the same with
the 08 and the airbags also can you post the trouble codes for both vehicles

 Yep, I've got dramas too, I cant connect to ABS and SRS systems and any related data list on Kia Cerato 06.

 make sure you choose your area first  on the first screen you will notice to your right it says diag.sw.area configuration  this is on the maxisys tool if this not chosen right no connection to the vehicle is possible  besides that if this are the only modules you are not connecting with check your networks data bus line for an open or short condition or a high voltage also powers and grounds to this modules in question,  this kia model is not avaible in usa i can't look up any information on it  but it should be the same as usa besides  the eobd2 protocol   let me know your finding on this 

 Have had my 908 connected to both a 2008 sorento and a 07 cee'd and no problems to report, everything worked fine 

 I've check on a different car, the same model, same result.