where is gm cam/crank correlation setting for maxisys
2859 Views 5 Replies Latest reply: 2015-03-07 09:25:19
-
Level 2
(11) points
-
Level 6
(707) points
Hi . The Crankshaft Pos relearn say for a GM Pontiac is found Power Control module/Module set up/. You will find it there for Monte Carlo as well along the same senario.Module Setup. Hope this is what you are after. Saying what type of GM and year with model will help understanding the exact route.If its the actual pids its under Control Unit\Power Control Module\Data Display\Engine Data Display\Ignition data Regards Austin -
Level 2
(11) points
98 chevy 2500 5.7 distributor removed ,for intake leak ,dist was bad also ,now i have to set the timing it needs to be 0+or- 2, on the snap on scanner its in the egr data ,where is is it on the maxisys ,the relearn function doesnt work on this older style thanks -
Level 6
(707) points
Hi. Check out this video. It an excellent video on how to set the timing on a 5.7 with a distributor the data you want will be in the engine data section watch the video Hope this helps Regards Austin
https://www.youtube.com/watch?v=rPlYNtNkI9k
I looked on my 908 and did find a relearn for a 98 car f 5.7 manual is there as well as auto pcm then special functions on manual comes right up under auto. Hope its what you are after.. -
Level 2
(11) points
i have seen this video ,i am trying to find out ,where the setting is on the maxisys scan tool its not there ,can anyone help -
Level 6
(707) points
Only place I saw it was on a 98 vehicle.year car was wrong but may work. check it out and see..I gave a blurb about finding this in an earlier reply below the video part
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities