Make
sure you have a good Internet connection, also you are going to need a battery
charger/maintainer: I bought one that worked good from Amazon for $115 (Powermax
110 Volt to 12 Volt DC Power Supply /Charger 55 Amp.) It will keep good and
clean voltage at around 13.5V during reflash.Make sure you have the latest Java application installed in your
computer as GM reflash program uses Java engine and Internet Browser. You might need to disable
Antivirus and Firewall on your computer as well. Once
you have registered enter website and accept ACDelco TDS Website terms and
conditions scroll down click “accept” then continue; There you will see the
Account and Menu info, click to “Service and Programming Information” a menu with different links will appear, select
the subscription you desire under “Service
and Programming Only” if using Maxiflash
Pro, click “Subscribe Now” if you haven’t done so, select the subscription (two days, one month, year, etc). It will give you a link if you bought
it already in the same menu, go to “Access Your
Subscription” ; From the TIS menu,
choose Service Programming System (SPS); (Note: depending in your computer
system It might happen that Internet Explorer browser might try to block Java
from running, in that case you have to create some program exemptions within
Internet Explorer settings, if that’s your case copy and paste the name of the
exemptions listed there, just read carefully it is there); click Start SPS to
open the application; Java will start and will download some information to
your PC, let the process finish; now a Software Installation window will appear, since you are
not using a Tech2, MDI, or any GM interface DON’T CLICK INSTALL, CLICK SKIP
instead since your are using Maxiflash PRO, otherwise it will install Tech2 or MDI interface drivers; once you SKIPPED the
Tech2 or MDI driver installation continue;
now another box window will appear, there you will see a list of J2534
interfaces, select Maxiflash PRO from list and click next; you will see a menu “Reprogram ECU” or “Replace and Reprogram
ECU” select accordingly; Now connect your Maxiflash PRO to the vehicle (connect Maxiflash to OBD2
connector first, then use USB cable provided to connect to PC), follow the on screen instructions carefully and click next when ready; Identify
your vehicle from drop down menu, the application will try to communicate the
vehicle now; VIN will be pulled from your vehicle, make sure it is correct and
click next; now select the controller you want to flash from menu and click next; select
programming type NORMAL and click next; Now a page will review controller
calibrations, click next; now calibration will be downloaded from GM server and
controller will be updated, it might take like 20 minutes; When your update is complete you will see a
warranty claim window, YOU'RE DONE, you can clear codes now or you can continue
to update more controllers. GOOD LUCK ;0)