5468 Views 27 Replies Latest reply: 2016-04-29 16:29:35
VAG-COM will automatically tell you a suggested coding (HEX interface required), otherwise contact us for assistance.
Used to deactivate individual airbag components (see repair manual for details).
If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed.
[Select]
[15 - Airbags]
[Security Access - 16]
Enter 30475 or 20324 to enable the basic setting. Note: It is unclear
which of these is correct; it seems there may be two different variants
of these modules, using two different Security Access codes, and we are
not sure how to tell which one is which.
[Do it!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The reset has been performed.
[Done, Go Back]
[Close Controller, Go Back - 06]
If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too.
Prerequisites: