Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > Europe Cars > 9AF3 fault code on BMW e60
9AF3 fault code on BMW e60

2847 Views 4 Replies Latest reply: 2016-10-02 13:37:23


  •   Level 4   
    (179) points
    afoadi
    2016-05-30 12:23:21
    The bmw e60 had 9AF3 fault code ,the buckle and pretesioner replaced but the fault code come back again!!! What shoud I do?
    Reply

  •   Level 9   
    (5837) points
    Ashraf

    2016-05-30 12:47:33 (Reply to:afoadi)

     Hi 
    Could you please double check your fault code if its the right one as I can't find this code any where.......or try reading it with any other tool and see what fault code you getting....
    Reply

  •   Level 4   
    (179) points
    afoadi
    2016-05-30 12:56:00 (Reply to:Ashraf)
    Hi
    I did check again!! But the code did the same!!
    9AF3 : sfz : resistance, firing circuit,belt tensioner driver,too low
    I will try with other tool too
    Reply

  •   Level 10   
    (10965) points
    Autel Support

    2016-05-31 10:00:59 (Reply to:afoadi)

    Hi, please try to do coding for module SFZ "Vehicle centre satellite " first to check the result. If the code persists, then please upload a data log for us to check further. Thanks!

    Reply

  •   Level 7   
    (962) points
    912guy

    2016-10-02 13:37:23 (Reply to:afoadi)

     Try encoding the car, if this doesnt work,if you have INPA version 5.0.6  and kdcan cable go to the module and the status under live data and then look for the signal diplay when you connect the black circle should be completely filled and when you disconnect the circle will become empty.This will show you a latch connection signal.If you have signal,then you may need backprobe and last result reprogram the car.Hope this helps..
    Reply
1
  Total1 Pages
Last Post Next Post Go to original post Reply to original post
Related links
Top users
Online users
Search Communities