Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > USA Cars > Autel Md808 Pro error code result change
Autel Md808 Pro error code result change

2646 Views 3 Replies Latest reply: 2019-09-24 14:22:40


  •   Level 2   
    (21) points
    Ken
    2017-11-06 20:31:42
     My Autel Md808 Pro was giving me an error code B0084-39 and Boo84-OF that the driver seat position sensor is bad on a 2008 Escalade, I upgraded the software and now it has the same error numbers but now says it's the right front impact sensor. Not sure where to look?

  •   Level 2   
    (31) points
    Electrohandyman

    2017-11-08 12:51:54 (Reply to:Ken)

    From AllData:

    DTC B0084 39
    Front End Sensor 2 Internal Electronic Failure (Right)

    DTC B0084 0F
    Front End Sensor 2 Incorrect Component Installed (Right)

    You could probably swap the sensors left/right (clear the faults) and see if they come back to determine if it is actually a bad sensor or bad wiring.

  •   Level 10   
    (7578) points
    witsend

    2017-11-09 14:57:40 (Reply to:Ken)

      If  you have a bad front crash sensor your SRS or airbag warning light would be on .Just make sure before messing with components , the battery is disconnected and has been at least a few minutes. Sometimes just loosening and re-tightening the mounting screws or unplugging and reseating connectors is enough to get connection references back in specs the module expects to see.

  •   Level 2   
    (21) points
    Ken
    2019-09-24 14:22:40
     Had the same issue, sensor was bad.
1
  Total1 Pages