Autel Support Communities

Welcome, Guest

Communities > Diagnostics > Asian Cars > Nissan Qashqai J10 key programming probl...

Nissan Qashqai J10 key programming problem P1610 and P1615 DTC

2295 Views 11 Replies Latest reply: 2020-01-11 05:20:22

Level 2
(20) points

Katarino
2019-12-25 10:08:03

Hi, I'm a new member and I have now an MaxiIM IM608.
I have a problem programming a keyless for a Nissan Qashqai J10. First I try to program with MVP the programming sequence goes OK, but at end, neither customer key neither new key start the car.
Now I have IM608 also try to program key, but same problem.
DTC P1610 and P1615.
Tge programming sequence goes OK, immo light flashes, transponder block, but at end key don't start the car.
Nissan Qashqai J10 VIN SJNFCAJ10U1125013
Year 2007
Bcm label 3 C4f1. Part number JD12CED.
284B2-JD12C
ECU 48810-JD91A
Thanks in advance and merry Christmas to all of you.

Tags: P1610 , P1615 , Nissan , Qashqai , J10

Reply
Level 5
(345) points

Costee

2019-12-25 14:37:27 (Reply to:Katarino)

If you're sure the two keys are good, then the BCM is faulty. Any of the following BCM can work for your car:
284B2-JD12C
284B2-JD12D
284B2-BR01B
284B2-BR01C
284B2-BR02C
What was the PIN you used?
I presume you used the mechanical key to programme.
I don't think the issue has to do with 48810-JD91A, which is the steering lock unit.

Reply
Level 2
(20) points

Katarino
2019-12-25 23:19:40 (Reply to:Costee)

Pin code was 3328.
I try program with I-key:
https://drive.google.com/file/d/15458PVrge1tBaFEljnQmHKvyWgBhTSrl/view?usp=drivesdk
https://drive.google.com/file/d/1518SwffRq4W3t9NSw8eQ507Lk04XsTBd/view?usp=drivesdk
What could make BCM faulty?
There is nothing to do on bench to repair BCM?

Reply
Level 5
(345) points

Costee

2019-12-26 08:28:56 (Reply to:Katarino)

The pin code is correct.
Usually an electrical breach would damage the BCM (e.g. improper battery connection).

Reply
Level 1
(3) points

ladybug99

2020-01-01 01:00:19

Code 1610 is for bcm you should look in to it and when you program a new key you have to use macanicle key and then put your pin #

Reply
Level 9
(5837) points

Ashraf

2020-01-02 18:27:53 (Reply to:ladybug99)

Where do you get this macanicle key from.............?

Reply
Level 2
(20) points

Katarino
2020-01-04 17:56:12 (Reply to:Ashraf)

Hi,
I get it from a Spanish reseller.
Why you ask?
Is not the right reference?

Reply
Level 2
(20) points

Katarino
2020-01-04 18:18:35 (Reply to:ladybug99)

Do you know the right configuration for the transponder?
I have tango, mini keytool, kx-x2, rw4, megacopy.
Thanks in advance.

Reply
Level 2
(20) points

Katarino
2020-01-04 18:34:23 (Reply to:Costee)

BCM must be new or could be from scrap?
The BCM don't need to be paired with ECU and steering lock unit?

Reply
Level 9
(5837) points

Ashraf

2020-01-05 12:14:56 (Reply to:Katarino)

I asked you because I have never needed the macanicle key code for programming the Keys on Nissan as you said you need this code to program keys.......Or may be I did not understand you did mean for
macanicle key........

Reply

Total2 Pages

Last Post

Next Post Go to original post

Reply to original post

Related links: Top users; Online users; Search Communities