Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > Europe Cars > Panamera Turbo 4.8 Deactivating Transpor...
Panamera Turbo 4.8 Deactivating Transport Mode

378 Views 30 Replies Latest reply: 2024-04-12 09:14:20


  •   Level 3   
    (58) points
    Desertmaster
    2024-03-13 16:01:06
     I have mistakenly activated the Transport Mode which created problems. I want to go back to deactivate, but don’t know how to get to the right function and which scr

  •   Level 9   
    (3714) points

    2024-03-13 16:27:24 (Reply to:Desertmaster)

    Hi, I think this must be done by a Porsche /vag dealer, I could not find Porsche on the
    device for transport mode.

  •   Level 9   
    (3714) points

    2024-03-13 16:34:54 (Reply to:)

    Hi, there is a thing you can do yourself to turn this off, put on hazard lights and press
    ignition button and keep it pressed for about 15 seconds,you will see on the
    dashboard transport mode on or off ,when off release ignition and turn hazard off.

  •   Level 3   
    (58) points
    Desertmaster
    2024-03-14 08:31:13 (Reply to:)
     Hello,

    Thanks a million buddy, but can you tell me what the RED speed warning means.

    I am also asking for your assistance again. My car codes and programming is badly screwed up, I got about 10 faults after scanning. I tried the quick faults delete, as well as disconnecting the battery but both didn’t work. I also tried rest to the handover or factory reset , but again it didn’t work. I tried restoring from the backup, the codes on it were bad.

    Can you please guide me to re-program all the codes for all the functions of the car online. I have an active membership and a strong WIFI.

    I will truly appreciate your kind assistance.

    Best Regards.

  •   Level 9   
    (3714) points

    2024-03-14 13:44:47 (Reply to:Desertmaster)

    Hi, the red warning for speed is a security measure to not drive faster because of the
    simple reason that something is wrong with the car, this is a safety measure. Do not
    try to erase the codes because they immeadeately returns, read the codes and try to
    give them to me ,maybe I can give you the repair advice.

  •   Level 3   
    (58) points
    Desertmaster
    2024-03-14 23:11:33 (Reply to:)
     Again, I don’t know how to thank you. 
    I will read all the codes’ problems and forward it to you.

  •   Level 3   
    (58) points
    Desertmaster
    2024-03-15 12:36:56 (Reply to:)
     Hello, .. Forgive me friend I don’t know your name.
    Several functions of the car have faults; most are code problems, some showing implausible, some du to active transport mode which I could not deactivate because I didn’t know the processes. 
    The Limited Speed Warning is back on after the scan. Below are the faults as they appeared in the scan results.
    I am really embarrassed and apologise for the inconvenience. But I took it to the dealer and they wanted an arm and leg for it, about USD 720.

    DME  3 Faults     Transmission Control 1 Fault
    Stability Mgmt  2 Faults    Instrument Cluster 1 Fault 
    Gateway 1 Fault   Additn Instrument Clock 1 Fault 
    AC  3 Faults   Level Cont PASM  7 Faults 
    Front End Electronics  3 Faults     Rear End  1 Fault 
    Passenger Door 3 Faults  Left Rear  2 Faults 

    I know if the faults can be repaired, or if it requires complete 
    reprogramming. I think a complete programming would be easier than doing 
    it one by one 

    You have my thanks and gratitude, Regards.

  •   Level 3   
    (58) points
    Desertmaster
    2024-03-15 12:58:55 (Reply to:Desertmaster)
     I honestly would like to learn how to write codes and program online. I have a scanner and online subscription that is a waste of money. Atuel territorial was not helpful at all. And getting support is almost impossible. They always answer with something that has nothing to do with your problem.

  •   Level 9   
    (3714) points

    2024-03-15 16:18:12 (Reply to:Desertmaster)

    Hi, this is not what I ment, I need the fault numbers and with that I possible can give a
    solution, I already see on what you describe that there are lots of problems all over the
    car.regards n.Penders from Holland.

  •   Level 3   
    (58) points
    Desertmaster
    2024-03-16 13:56:59 (Reply to:)
    Hello Penders,
    I hope you’re well.

    My apologies, I misunderstood the requested codes information. However, I am listing herewith the code numbers. 
    The codes are all DTC faults; either Active/Static or Active/Sporadic. Because of the number of faults, I think new online reprogramming from scratch will be the best way to go if that’s possible, rather than fixing errors one by one.

    DME P0597, P2186
    Inst. Cluster C11000, C12006, C1200A, C1200B, C1200C, 1200D, C1200E, C12013, C12014, C12016
    Parking Brake 000026
    Gateway C12009, C1200A, C1200B, C12018,c1201A, C13064
    Add Inst Clock  008000
    A/C  008219, C008271, C008275
    PASM  000220, 000268, 000270
    Dynamic Chassis Control 000011, C1208A
    Front End Electronic 87010E, 87030E
    Rear End Electronic C11000
    Passenger Door  006E, 0843
    Left Rear Door 0043, 0058
    Rear Lid  000008

    I don’t really know how to thank you for your invaluable and kind assistance.
    If there’s anything, anything, I can do for you in this part of the world, please don’t hesitate to ask

    Regards. Ibrahim
1
  Total4 Pages