Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > USA Cars > programming a VIN to a used PCM
programming a VIN to a used PCM

443 Views 2 Replies Latest reply: 2024-09-26 09:16:52


  •   Level 2   
    (10) points

    2024-06-19 21:46:17
     I replaced the PCM in a 2004 Ford F-150 with a used PCM. Was able to program keys but now have VIN mismatch from ABS module. What do I need now to program the original VIN to the new/used PCM? My Autel is the MS906BT. I'm pretty sure I'll need a J2534 pass through, but which one/ones is/are compatible, etc. Thank you for your time.  

  •   Level 9   
    (5310) points

    2024-06-20 08:58:03 (Reply to:)

    Hi, yes you also need the j box to do this. Preferably the j2534 or a generic ,,drew tech
    cardaq plus 3,,compatible devices are Toyota techstream, Volvo vid, Honda HDS,
    landrover/jaguar IDS,or BMW 3g. for OEM diagnostics.

  •   Level 1   
    (3) points
    Terryiliffe

    2024-09-26 09:16:52 (Reply to:)

    Try perimeter reset after you have ran PMI , you must start car for it all to work. This
    information is based on the later rangers 2020. Based on the date you proberly sorted
    it out anyway
1
  Total1 Pages