Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > Diagnostics > USA Cars > ETC Light
ETC Light

143 Views 2 Replies Latest reply: 2024-08-14 21:34:59


  •   Level 1   
    (8) points
    PATRIC JANSSEN
    2024-08-11 22:38:13
    Hi every body,
    I changed the Intake Manifold Throttel Body of a Jeep Patriot 2008 2.0lt  CRD, in 2015 but the ETC light staid on to this date. The engine runs perfectly well and the advance is superb. How can I encode it or adapt it or do re-learning
    to the ECU with my MaxiSys906BT to learn the new part has been installed so the light will stop coming up on the instrument panel? —is the MS906BT capable of doing this type of adaptation/coding?—

    The vehicle is equipped with a VW BKD TDI engine with Unit Injectors for the European  Market and has a Pierburg
    Throttle Body.    Any help will be very much appreciated,     thanks,   Patric.
    file:  PIERBURG.jpg
    Reply

  •   Level 9   
    (4743) points

    2024-08-12 11:06:15 (Reply to:PATRIC JANSSEN)

    Hi, to reset the etc light do this,insert key in ignition and turn it on,do not start, wait for
    all warning lights to turn off, only engine light stays on,push down gas pedal to the
    floor slowly ,slowly release the pedal , after this turn off ignition. Start the car and
    check if everything works normal again. Check for ecm codes.
    Reply

  •   Level 1   
    (8) points
    PATRIC JANSSEN
    2024-08-14 21:34:59 (Reply to:)
     Hi, many thanks for your response.
    Reply
1
  Total1 Pages
Last Post Next Post Go to original post Reply to original post
Related links
Top users
Online users
Search Communities