Autel Support Communities
Autel Support Communities
Welcome, Guest     Sign in
Communities > TPMS > TS401 > TS401 will not power up after Updated to...
TS401 will not power up after Updated to 5.56

2588 Views 3 Replies Latest reply: 2020-07-20 02:44:29


  •   Level 2   
    (14) points
    alex_pivtorak
    2019-05-25 13:32:09
     Updated to new s/w version (TS401_GL_V5.56_Update). Screen showed updating, finished, unplugged it. Won't power up now.
    Took it apart, unplugged battery, plugged back in, nothing.
    Tried with power cord plugged in with battery disconnected, nothing.
    Help to solve this problem !
    HARDWARE : MaxiTPMS401_V30  2012/07

  •   Level 2   
    (14) points
    alex_pivtorak
    2019-05-25 14:15:02 (Reply to:alex_pivtorak)
       I solved my problem !
    For wake up my device i try :
    1. Hold N key and POWER for 5-10 sec : device is power on with PROGRAMM MODE.
    2 .Connect USB cable , but Windows see Bad USB devise.
    3 . Long press POWER - device OFF.

    4 . Disconnect battery.
    5.  Press and hold N key and attach USB : device is power on with PROGRAMM MODE , but Windows detect COM device !
    6 . Update with MaxiLink2.
    7 .Disconnect USB cable and POWER OFF. Connect battery.
    8 .POWER ON -DEVICE WORK.

  •   Level 1   
    (3) points
    RONDO

    2019-06-14 22:49:38 (Reply to:alex_pivtorak)

     It really did work thanks ,was getting ready to send back . Am going to copy . I even went to local computer repair shop and they were stumped. 

  •   Level 1   
    (3) points
    4runnerguy

    2020-07-20 02:44:29

     Thank you Alex. I thought I was doomed to buy another unit. Well done sir! Well written and presented. Worked perfectly. Thank You again!
1
  Total1 Pages