NISSAN QASHQAI 2010
3364 Views 22 Replies Latest reply: 2020-01-19 11:01:13
-
Level 5
(345) points
Good. This confirms the p/n I earlier mentioned for your car (284B2-JD12B). The pin 7743 you used is also correct. -
Level 8
(2559) points
also can i program a used i-key to this car as the one with it is faulty and what do you suggest i replace the bcm or pcm -
Level 5
(345) points
Since the pcm appears damaged, I'd suggest you replace this first. I'm uncertain whether a used I-key is reusable, but you could try. What matters most however is the mechanical key which is used for the programming for ignition to start. -
Level 8
(2559) points
i take it i can use a ecu from another car (used) -
Level 5
(345) points
-
Level 5
(345) points
In response to this, I think a used I-Key is reusable. I was under the impression that your car had a separate mechanical key fitted with the chip. -
Level 8
(2559) points
no this is a 2 button key with the chip inside i have managed to delete the original key somehow and now it wont relearn. -
Level 5
(345) points
-
Level 8
(2559) points
niether as yet im looking for one that particular ecu is hard to find there are a few 0281014859 but nine is 0282014858 are they compatable. im beginning to wonder if maxisys is good enough for the job a lot of the time it says function not supported. -
Level 5
(345) points
That number is for one or two years preceding yours, so I really can't tell regarding compatibility. The one compatible with yours is that for years after yours. Maybe it's because of non-compatibility that Maxisys reports non-supported. You might have to try other tools if in doubt.
- Related links
-
Top users
-
Online users
-
Search Communities